DURAF迪瑞夫混凝土地面染色地坪材料
产品组成 Product composition
产品类型 Product type
混凝土地面染色剂颜色分为：
红色、绿色、天蓝色、宝蓝色、黑色、灰色、黄色
The color of the concrete surface stain is divided into: red, green, sky blue, precious blue, black, gray, yellow
产品规格 Product specifications
产品包装：20公斤/桶
密封蓝色塑料桶包装
Product packaging: 20 kg/bucket sealed blue plastic drum packaging
产品优势 Product advantages
1
原材料优势
Raw material advantage
A 、产品粒径达到纳米级，能有效渗透混凝土地面基层
The particle size of the product reaches the nanometer level and can effectively penetrate the concrete ground base
B 、产品内添加光稳定剂，被染色地面颜色持久耐用
Light stabilizer is added to the product, and the color of the stained ground
C 、产品内添加交联剂，提升产品与混凝土的粘接强度
Addition of crosslinking agent in the product to enhance the adhesion strength between the product and concrete
D、产品内添加偶联剂，
进一步提升产品与混凝土的粘接牢固度
Add coupling agent to the product to further enhance the adhesion between the product and concrete
2
功能优势
Functional advantages
改善成本混凝土地面颜色，增强原地面美观度
Improve the ground color of cost concrete and enhance the original ground beauty
施工工艺 Construction process
一、地面基础处理
Ground base treatment
1、强度处理
Strength processing
A
如地面基础起灰起砂严重、强度严重不够，需对地面基础进行密封固化处理，处理工艺如下：
For example, the ground foundation is seriously dusty and the intensity is not enough; The ground foundation needs to be sealed and solidified. The treatment process is as follows:
首先清除、清扫地面基础表面上的杂物；
First, remove and clean up debris on the surface of the ground base;
用高压水枪冲洗地面灰尘及沙粒，其污水排放采取经得甲方同意的排放方式；
Flush the ground dust and sand with a high-pressure water gun, and discharge the sewage through the approval of Party A.
地面晾干，时间根据施工现场的温度与通风效果而定；
To dry the ground, the time depends on the temperature and ventilation effect of the construction site;
均匀喷洒混凝土密封固化剂材料对地面进行密封增强。
The surface is sealed and reinforced by evenly spraying concrete sealing curing material.
待材料与地面充分反应完全后，采取地面基础强度一般的工艺。
After the material is fully reacted with the ground, the ground base strength is generally adopted.
B
如地面基础强度一般，增强处理工艺如下：
If the ground base strength is general, the enhancement process is as follows:
首先清除、清扫地面基础表面上的杂物；
First, remove and clean up debris on the surface of the ground base.
分别采用30、50、100、150、200、300目等树脂磨片水磨地面；
Using 30, 50, 100, 150, 200, 300 and other resin grinds to grind the ground.
300目树脂磨片水磨地面后，清洁地面，地面自然充分晾干，均匀喷洒混凝土密封固化剂材料，等待材料与地面完全充分反应，反应时间通常6-8小时。具体时间根据施工现场的温度与通风效果而定。
After the 300-mesh resin abrasive grinding surface, the ground is cleaned and the ground is naturally fully dried, and the concrete sealed curing material is evenly sprayed, waiting for the material to fully react with the ground. The reaction time is usually 6-8 hours. The specific time depends on the temperature and ventilation effect of the construction site.
待材料与地面充分反应完全后，采用500目树脂磨片水磨地面，研磨后洗吸干净地面污水，地面自然晾干，进入下一步工艺。
After the material is fully reacted with the ground, the 500-mesh resin grinder is used to grind the ground. After grinding, the ground sewage is washed and sucked. The ground is naturally dried and enters the next process.
2 平整度处理
Flatness processing
在地面基础增强处理前的原地面尽量平整度好，3米靠尺间隙小于3mm。
The original ground before the ground foundation enhancement treatment is as good as possible, and the 3 meter foot gap is less than 3mm.
平整度的处理视研磨的深浅而定，一般情况，经研磨后的地面露砂必须均匀。切勿一部分露砂，一部分仍没有磨去表面水泥浆，这样达不到颜色均匀的效果。
The level of treatment de